FerroActiv H20: is a product formulated with GS and GD technology (the granules are 100 % soluble and dispersable in water, easy to be assimilated, which means an efficient and fast control of the ferric chlorosis. The iron is essential for the chlorophyll synthesis and for the plant development. The iron takes part in the different levels of electron transportation chain, fundamental for the cell respiration and in the metabolism of enzymes and proteins. It also has an important role in the nitrogen fixation.
FerroActiv H20 Abono CE: is an EC fertilizer based on EDDHA-iron and formulated looking for the high concentration on ortho-ortho EDDHA isomer which provides the optimum efficiency in extreme calcium and alkalinity soil conditions. As chelating agents include in the EC regulation on fertilizers (nr. 2003/2003 D.O.C.E 21/11/2003).
Orhto-ortho-EDDHA guarantees the maximum stability and persistence on the soil.Usually after 1-2 weeks, when the product has reached the roots, the crop becomes green again.
Formular molecular: C18H16N2O6FeNa
Molecular weigh: 435,2
CAS Reg.Nº: 84539-55-9
EC Nº: 283-044-5
Soluble Iron: 5.0 %
Chelated Iron [o-o]EDDHA (1): 2.0%
Chemalted Iron [o-p]EDDHA (2): 1.0 %
Density : 0.65 – 0.75 g/cc
pH (1% in water): 7.5 – 9.5
Interval for a good stability (efficiency) of the product: 3 – 11
Chelating agent EDDHA: solubility 300 g/l, maximum working solubility 120 g/l at 20ºC.
(1) Official o-o-EDDHA method (UNE-EN 13368-2)
(2) Official o-p- EDDHA method (UNE-EN 15452)
FerroActiv H20 is an iron chelate, stable and highly soluble in water, with a clear celerity and shock effect and persistence. Also the chelating agent EDDHA provides and extremely stability, even at higher pH.
It is an iron chelate easy to use, without presenting any kind of plugging problems.
Direct to the soil
Spread the product out, mixed with fertilizer or sand or very well-pulverized, straight to the soil. Then water the treated area so that the product can reach the roots of the plant.
Holes and/or furrows
Make holes (minimum 4) or a 15 – 20 cm deep furrow around the trees or along the plantation line. Apply the needed quantity, previously dissolved in water (approx. 80 g/product in 10 liter/water) close to the furrows and water it immediately after.
Apply the product through liquid fertilizers localizers or using manual injectors. Several punctures must be done around the tree or close to the dripping zone. Then irrigate the area.
Apply the product using a container that is connected to a hollow ploughshare grower, which allows conducting the product close to the plantation line.
With irrigation water
Add the product, once dissolved with irrigation water, either by spraying, dripping or abundant irrigation. Thanks to its high solubility and the quality of the formulation, FerroActiv does not block filters or droppers. A product concentration of no more than 80 g/l of water is recommended. Add always the product on top of the water and not the other way round, in order to enable an easy dissolution.
Wet both leaves sides abundantly with a maximum dosage of 0.1 % (100 l of product in 100 liter of water) and repeat operation if needed.
|Crop||Dosage g/t||Treatment period|
|Fruit and Citric Trees||Fruit tree and Vine Crops Apply by the end of winter or beginning of spring, matching up with start of new sprouts.Citrus / fruit and other evergreen crops One application during the spring or at the beginning of the summer, before the second sprouting. Make a single treatment in spring or at the beginning of the summer, before the second sprouting.|
|Breeding of plants||3 – 5|
|Seedlings||5 – 15|
|Young trees||15 – 25|
|Producing trees||25 – 50|
|Very grown trees and affected by the ferric chlorosis||50 – 100|
|Young stocks||10 – 25|
|Producing stocks||3 – 5|
|Grapevine||5 – 10|
|Horticultural and Ornamentals Crops||Apply from the beginning of crop or after uprooting.|
|Beginning of seasonal growth||1 – 2 g/m2|
|Full growth||2 – 5 g/m2|